Builders Gallery

posted in: CNC, Hot Wire | 0

Here are some CNC Foam Cutter built by fellow enthusiasts who have been kind enough to send pictures. As you can see you don’t have to follow my builds exactly or use the same materials. 3d printing is becoming a … Continued

How to use Jedicut G-Code with GRBL 4 Axis CNC Foam Cutter

posted in: CNC, Hot Wire, JediCut, Software | 2

Jedicut is a free program that can be used with the USB CNC foam cutter build on this website. It only runs on Windows. I have made a full tutorial on making a swept-wing using Jedicut but this was configured … Continued

Getting Started with DevFus Foam 2 – Hot Wire CNC Foam Fuselage

So you’ve made some wings with your Hot Wire CNC Foam Cutter and wondered if you can make fuselages as well   I’ve been on that journey to and now I can share my knowledge and experience. I purchased DevFus Foam … Continued

How to build a Hot Wire CNC Foam Cutter – Parallel Port Version

posted in: CNC, Hot Wire | 2

This post details my original build which I’ve now updated with a new version. Here’s the link if you prefer to build the USB version https://www.rckeith.co.uk/how-to-build-a-usb-cnc-hot-wire-foam-cutter/ The parallel port has long since been discontinued but in 2019 it’s still a … Continued

Free CNC software to make foam wings with a Hot Wire CNC foam cutter

posted in: CNC, Hot Wire, JediCut, LinuxCNC, Software | 6

You’ve built your 4 axes CNC Foam Cutter and now you need some free CNC software to generate g-code for that foam wing. If you can afford it then buying software may be the way to go, but expect to … Continued

Do NOT follow this link or you will be banned from the site!