Arduino CNC Foam Cutter

posted in: CNC, Hot Wire | 1

Can you use Arduino to control a Hot Wire CNC  foam cutter, is a question I get more frequently now. Yes, you can. In this article l will show 2 options depending on the hardware you are using or intend … Continued

How to build a Hot Wire CNC Foam Cutter – DIY

posted in: CNC, Hot Wire | 2

Why would you want to build a hot wire CNC foam cutter machine?  For me it was a way to build wings and fuselages for RC airplanes that weren’t readily available. Doing it yourself (DIY) is not as hard as … Continued

Free CNC software to make foam wings with a Hot Wire CNC foam cutter

posted in: CNC, Hot Wire, JediCut, LinuxCNC, Software | 2

You’ve built your 4 axes CNC Foam Cutter and now you need some free CNC software to generate g-code for that foam wing. If you can afford it then buying software may be the way to go, but expect to … Continued

Free CNC software for 3 and 4 axis machines

posted in: CNC, CNC Router, Hot Wire | 0

Why would I use free CNC software You’ve built your 4 Axis hot wire foam cutting machine or 3 Axis router and now you need some CNC software to control the machine. I often get questions through this website from … Continued

Hot Wire CNC Foam Cutter Parts List

posted in: CNC, Hot Wire | 0

To build a Hot Wire CNC Foam Cutter the main parts you’ll need are stepper motors, a controller board, power supply. The lists below are my recommended parts that are required to build a machine just like mine. As well … Continued

Hot Wire CNC Foam Cutter Frequently Asked Questions

posted in: CNC, Hot Wire | 0

I get quite a few questions from users all over the world most asking very similar questions so I thought I’d post the  most common questions and my answers here Can I use NEMA 17 steppers motors for the machine? … Continued

Do NOT follow this link or you will be banned from the site!