How to get successful 3d Prints with ABS on a Glass Heated Beb

posted in: 3d-printer, Radio Controlled | 0

Printing ABS on a 3d printer can be a little harder than PLA. Up until now, I have avoided it after a couple of poor prints. I built a tri-copter that used a PLA 3d-printed yaw mechanism but I’ve broken … Continued

Depron Extra 300 electric park flyer

posted in: Builds, Radio Controlled | 0

This is my Depron Extra 300 electric park flyer built from 6 mm depron.  The plan is from RCPowers which is a free plan. Power is a TowerPro 2409 1000KV brushless turning a 10×3.8 slow fly prop.  The battery is … Continued

Do NOT follow this link or you will be banned from the site!