6 Solutions for Mach3 Obsolete Parallel Port Interface

posted in: CNC, CNC Router, Hot Wire | 4

The parallel port has been discontinued on PC’s for several years now.  It was mainly used to connecting a PC to a printer.  Mach3 was designed to use this port to send the step, direction pulse to the CNC controller … Continued

CNC Hawker Hurricane Update

posted in: CNC, Hot Wire, Radio Controlled | 0

Here’s a progress report on my CNC Hawker Hurricane built with my Hot Wire CNC Foam Cutter. The video below shows how far I’ve progressed. it’s going to be built as a Desert Air Force Hurricane IID tank buster, with … Continued

Hot Wire CNC flying wing build details

posted in: Builds, CNC, Hot Wire, Radio Controlled | 0

Here are the build details and some videos of my first hot wire flying wing made with my CNC foam cutter.  If you’d like to build a foam cutter then I have all the information here   http://www.rckeith.co.uk/cnc-hot-wire-foam-cutter/. I’ve called it … Continued

Hot Wire CNC Foam Cutter Frequently Asked Questions

posted in: CNC, Hot Wire | 0

I get quite a few questions from users all over the world most asking very similar questions so I thought I’d post the  most common questions and my answers here Can I use NEMA 17 steppers motors for the machine? … Continued

FPV Flying Wing

posted in: Builds, CNC, FPV, Hot Wire | 0

FPV Flying Wing Build FPV (First Person View) if you don’t know is probably as near as you can get to real flying without being in one of those big simulators costing lots of money.  Basically you can see what … Continued

4 Axis CNC Configuration for TB6560 and Mach3

posted in: CNC, CNC Router, Hot Wire | 4

Mach3 is the software that turns your computer into a CNC machine controller. If you’ve found this page because you can’t get your machine to work then I hope this helps you. If after trying the settings I’ve used it still … Continued

Do NOT follow this link or you will be banned from the site!